Kenwood TH-27A - Manual (Page 35)

The paging function is useful to call all nnembers of a
group, a specific station, or wait for a call from another
station by using a DTMF (Dual Tone Multi Frequency)
signal.
Example; When member 2 is called
4-9. PAGING
F: 145.660MH z
Individual Code: 11 1
Code to be called: 333
-_L'_L
Individual Code
F: 145,660MH z
Individual Code: 222
Member 1
F: 145.660MH z
Individual Code: 333
Member 2
F; 145.660MH z
Individual Code: 444
Member 3
The common group code and individual codes should be
determined in advance. These codes should be from 000
to 999 (3 digits). Unlike DTSS, the code of the calling
station is displayed on the receiver, so the receiver can
identify the calling station.
When called by a local station, the individual code the
individual code of the calling station is displayed. When
called with a group code, that group code is displayed.
Paging operation procedure.
Set your station code.
Tune to frequency of the other station.
Enterthe paging mode.
Set the code of
station to be called.
i
Transmit
Call Stand by
35