Kenwood TH-27A - Manual (Page 22)

Two-digit Recall
In this nnode, numbers 00 to 09 are entered to recall
channels 0 to 9 respectively. All channels 00 to 39 can
be directly recalled using the numeric keys. To return to
the VFO mode, press those keys.
• ONE-Digit Recall, or TWO-digit Recall Selection
1. Turn the power switch off.
2. Press and hold the 6/MEMO key and turn on the
power switch.
4-4-7. Memory Shift
Using this function you can copy the contents of a
memory channel or call channel to the VFO without
changing the data in memory. This will allow you to begin
tuning atthe point specified by the memory channel data.
•
• If you do not need to change the frequency after
shifting;
1. Select the desired Memory Channel.
2. Press the ENT key twice. If an Odd Split Memory
channel is selected, only the receive data is copied.
• If you need to change the frequency after shifting;
1. Select the desired Memory Channel. (For example
Ch. 5)
2. Press the ENT key.The display will indicate the ENTER
mode frequency status.
LOCK
CMD
\
lij» • • nc
1 1 . IMl
B APO
J
3. Within 1 0 seconds of pressing the ENT key rotate the
tuning control to the desired frequency. The memory
channel or Call channel indicator will turn OFF to signal
the data has been successfully transferred to the VFO.
lUC cn
I
IJ.ULI
B APO
22