Itoi-nn, J\uli, I vju – Kenwood TH-27A User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Time Switch ON
• Set the Switch-on Time
1. In clock mode press the 1 key. The T.ON indicator and
hour will flash.
CXD
\ /
iToi-nn
/
J\ULI
^□oN ” B APO
/
I \
2. Rotate the tuning control to select the hour, then press
the ENT key. The minute will flash.
3. Rotate the tuning control to select the minute, then
press the ENT key.
• Activate the Time on Switch
1. In clock mode press the 2 key. The T.ON indicator will
indicate the time on switch is active. The transceiver
will turn the power on at the displayed time.
CXD
2. To release the function repeat step 1.
■ Time Switch OFF
• Set the Switch-off Time
1. In clock mode press the 4 key. The T.OFF indicator
and hour indicator will flash.
CUD
2. Follow steps 2 and 3 of SET THE SWITCH-ON TIME.
• Activate the Time off Switch
1. In clock mode press the 5 key. The T.OFF indicator
will indicate the time off switch is active. The trans
ceiver will turn the power off at the displayed time.
CID
ri-cn
I VJU
□
off
B APO
2. To release the function repeat step 1
44