Kenwood TH-27A - Manual (Page 14)

Display panel
------------
LOCK T) :.s = - s] F ^ E 1 D TC T,4
iTMigpIiEpi
TIME
sh O O'O O
B
l E_L mairA . G on Q
OFF
E APO/1 r;'( I
hn 1
1
® ® ® ®
® <
2
)
0 LOCK
(D TX.S
+ — s
(European version)
( D D
0DT
(D CT
14
LOCK ON when LOCK function is active.
ON when TX.STOP function is active.
This level nneter indicates the relative
receive input strength or battery voltage
level during transmit.
Displays the selected transmitter offset
direction.
During split channel operation both +
and — indicator light.
ON when Reverse function is active.
ON when Tone function is active.
ON when DTSS function is active.
ON when CTCSS function is active.
On when Tone Alert System is active. The
indicator will flash when a signal is
received.
(0) i^lMIllMEMOl
(Jl) fSEEiniWIiTiHEl
® E L M
© ima
888m:
p
8888
83:38
0 AL
0 H on
(J2) Hoff
(S) APO
®88
★
Displays the selected scan mode.
Flashes when scanning.
Displays the selected scan hold/resume
condition.
Displays the selected output power,i.e.
Economic-low, Low, Medium, and no
indicator Hi.
On when squelch is open.
Displays the operating frequency to the
nearest kHz, the frequency step size, or
the tone frequency. Flashes during VM
SCANNING and MHz scanning.
ON in paging mode.
ON in CLOCK mode.
ON when Priority Alert system is active.
ON when the ON TIMER function is
active.
ON when the OFF TIMER function is
active.
ON when BATTERY SAVER function is
active.
ON when AUTOMATIC POWER OFF
function is active.
Displays the current Memory Channel
number.The star indicator is on when the
Memory channel will be skipped during
Memory Channel Scan.
ON whenever the F key is depressed.