Kenwood TH-27A User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recalling stored DTMF code in receive mode
Press the F key for longer than 1 second and press the
MONI switch after flashing the F indicator.
CZD
More than 1
second
2. Press the numeric (0~9) key. The DTMF code stored
in the key will be output to the display.
3. The code is displayed from right to left as illustrated.
• Making a DTMF Call
1. Press the PTT switch.
2. Press the MONI switch (or CALL key) and then press
the numeric key for the channel where you stored the
DTMF code in receive mode.
The DTMF code will be output .The display will show
the code.
3. After transmiting the code the previously shown
frequency will reappear on the display.
NOTES
1. While the stored DTMF c o d e i s r e c a l l e d ,
transmission continues until the whole code string
is recalled even if the PTT switch is released.
2. You cannot stop output of the stored DTMF code
midway.
32