Kenwood TH-27A - Manual (Page 50)

• Operation with Remote Control Speaker Microphone
SMC-33
Notes
1. UP/DOWN will increment continuously if pressed
for longer than 1 second.
2. The microphone switch is operational even when
the F.LOCK switch on the main unit is turned ON.
3. Be sure to turn the POWER switch OFF when you
plug in or remove the microphone.
Keys 1 , 2 , and 3 on the SMC-33 are initially assigned to
memory channels 1 , 2 , and 3, respectively. The functions
of the keys on the transceiver can be set as follows:
1. Hold down microphone key 1 (or 2 or 3) and turn the
power on. The programmable function 1 (or 2 or 3)
indicator appears for 1 0 seconds.
CTD
2. When you press a key on the transceiver, the function
of that key is assigned to key 1 (or 2 or 3) on the
SMC-33.
Example: When you press the CALL key, key 1 on the
SMC-33 becomes the CALL key. When you press the
F key, then the CALL key, key 1 becomes the CALL
SCAN key.
The keys that you can set for keys 1, 2, and 3 on the
SMC-33 and their functions are listed on the next page.
MR1 MR2 MR3
Earphone jack
When the LOCK switch is turned ON the MR1, MR2, and
MR3 keys on the front of the microphone are disabled.
50