Remote control, Operating range of the re_mgte^contro, 3 close the cover – Kenwood UD-NF7 User Manual
Page 9: Note, Remote controi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control
Battery installation
1
Open the battery cover.
Operating range of the re_mgte^contro^
Point the remote control directly at the remote sensor
on the unit.
The remote control can be used within the range
shown below:
Remote sensor
2
Insert the included battery according to the
terminal indicated in the battery
compartment.
3
Close the cover.
Note
The included battery is for checking system
operations. Replace it with a new one as soon as
possible.
If the range or effectiveness of the remote control
decreases, replace the battery.
Periodically clean the transmitter on the remote
control and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
interfere with operations. Change the direction of the
unit ifthis occurs.
Keep the remote control away from moisture, heat,
shock, and vibrations.
Read through the attached Safety Precaution to
ensure the safe usage of the batteries.
9