Kenwood UD-NF7 - Manual (Page 26)

Random
The tracks on the disc can be played in random order
automatically.
To random play all tracks
1
Press [RANDOM] button on the remote
control until “Random” appears.
2
Press [CD/USB ^/M] button on the remote
control, or [►/M] on main unit.
Repeat play is cancelled automatically after all
the tracks are played.
To cancel random play
1
Press the [RANDOM] button again.
“RDM” indicatordisappears, and random play is
cancelled.
fRoST;
Note
If you press the [^ h ] button during random play, you
can move to the track selected next by the random
operation. By pressing the button, the beginning
of the track currently being played will be located. You
can’t go back to the previous track being played.
Programmed play (CD)
Up to 32 tracks can be programmed.
1
Press the [MEMORY] button on the remote
control during the stop mode.
“MEM” indicatorflashes.
2
Press the numeric buttons from [0] to [9] and
[^10] to select a desired track.
------------- 1------------
Selected track number
4
Repeat step 2 for other tracks.
• Press [MEMORY] repeatedly to check the
programmed tracks.
• Program can be cancelled by pressing the
[CLEAR] button.
Press the [CD/USB ^/M] button on the
remote control, or [^/M] on main unit.
Playbackwill start.
Note
See p.25to select tracker number 10or higher.
Programmed play (MP3/WMA)
Up to 32 tracks can be programmed.
1
Press the [MEMORY] button on the remote
control during the stop mode.
2
Press the [T/A] button to select desired
playback folder.
• U I I U
3
Press the numeric buttons from [0] to [9] and
1^10] to select the desired track.
f U i iylUt: n K
4
Repeat step 2 and 3 to specify other folders
or track numbers.
5
Press [CD/USB ^/M] button on the remote
control, or [^/M] on main unit.
Playbackwill start.
Note
See p.25to select tracker number 10or higher.
26
3