Kenwood UD-NF7 - Manual (Page 40)

Sleep Operation
This unit will enter the standby mode after the set time
has elapsed.
1
Play back the desired sound source.
2
Press the [SLEEP] button.
3
Within 5 seconds, press the numeric buttons
from [0] to [9] to set the time.
(1 minute to 99 minutes)
“SLEEP” will be displayed.
The unitwill enter the power standby mode
automatically after the preset time has elapsed.
The volume will be turned down 1 minute before
the sleep operation finishes.
To confirm the remaining slee^
1
While “SLEEP” Is Indicated, press the [SLEEP]
button.
To cancel the sleep operatjon;^^^^^
1
While “SLEEP” is indicated, press the [O]
button to enter the standby mode.
To cancel the sleep operation without setting
the unit to the standby mode, proceed as
follows.
1
While “SLEEP” is indicated, press the
[SLEEP] button.
2
Within 5 seconds, press the [0] button twice.
“SLEEP 00” will be displayed.
Using the Timer and the Sieep
Operation Together
Sleep and timer playback
For example, you can fall asleep listening to the radio
and wake up to CD in the next morning.
1
Set the sleep timer.
2
Set the timer playback.
Sleep timer setting Timer playback
• setting
End time
I 1-99 minutes
Sleep operation will
automatically stop
Desired time |
Timer playback
start time
40