Kenwood UD-NF7 - Manual (Page 34)

Using Radio Data System
Increasing number of FM stations has started
providing the Radio Data System service. These
FM stations send additional signals along with
their regular programme signals. They send their
station names, and information about the type of
programme such as sport, music, etc.
“TP” (Traffic Programme) will appear on the display
when the received broadcast carries traffic
information, and “TA” (Traffic Announcement) will
appearwhileatraffic information is on air.
PTYI (Dynamic PTY Indicator) will appear while the
Dynamic PTY station is received.
W W I / Iff j
You can control the Radio Data System by using the
buttons on the remote control only.
Information Provided by Radio
Data System
Each time the [Radio Data System DISPLAY]
button is pressed, the display will switch as
follows:
TUNER.
DISPLAY
B B C R 1 N E U S
Station name (PS)
■0
Programme type (PTY)
Q O O n M U T
I.' L.'. L.I. U I I I I ^
U K L I t H I H
When tuning in to a station other than an Radio Data
System station or to an Radio Data System station
which sends weaksignal, the display will change in the
following order:
No PS ■
FM 98.80
No PTY
FM 98.80 MHZ”« No RT •
/ I \ \
Using the Auto Preset Memory
While in the Auto Preset Memory mode, the tuner will
automatically search for new Radio Data System
stations. Up to 40 stations can be stored.
If you have already stored some stations in memory,
the number of new stations you can store will be less.
1
Press the [TUNER] button on the remote
control or [INPUT] button repeatedly on main
unit to select “TUNER” function.
Press and hold down the [A.MEMORY]
button on the remote control.
• After “AUTO PRESET” has flashed for
about 4 seconds, scanning will start
(87.50-108.00 MHz).
E'flUTO PRESET'- ■ => FM 87.50MHz
The station is saved once the Radio
Data System is found.
After scanning, the number of stations
stored in memory will be displayed for 4
seconds, and then “END” will appear for
4 seconds.
n a M F M T Ì Q V E t W
To stop the Auto Preset Memory operation
before it is compiete
1
Press the [A.MEMORY] button whiie it is
scanning for stations.
The stations which are already stored in memory
will be keptthere.
Frequency Radio text (RT)
34
2