Removing saran nets, Subwoofer pre-out connection, Connecting to the externai devices (tv – Kenwood UD-NF7 User Manual
Page 8: Etc.), To select aux, Connecting ipod/iphoneto_ty, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing saran nets
Saran nets are removable.
Subwoofer pre-out connection
r - -
-------■
You can connect a subwoofer with an amplifier to the
SUBWOOFER PRE OUT socket.
Audio cable
(commercially
available)
Commercially available
subwoofer (amplifier built in)
Audio signal
To
SUBWOOFER (
PRE OUT
socket
To audio input
socket
Main unit
Connecting to the externai devices (TV,
etc.)
I
^
This unit can output sound from external devices, such
as TV, etc.
Connect to the TV using an audio cable.
TV
To select AUX
• On main unit, press ^[INPUT] button repeatedly
until “AUX” is displayed.
• On the remote control, press ^[AUDIO IN/AUX]
button repeatedly until “AUX” is displayed.
Connecting iPod/iPhoneto_Ty^^^^^
Video files from iPod/iPhone can be viewed by
connecting the unit to TV/monitor.
Place the iPod/iPhone to the dock, and then connect
the Video input terminal of the TV or monitor and the
VIDEO OUT socket at the back of this unit. Then, by
press and hold the [iPod DISPLAY / TV OUT] button
on the remote control, set the TV out function to On.
(P-21)
Note
TV out display is not support through USB terminal.
To playbackvideos on iPod/iPhone screen, press
[iPod DISPLAY/TV OUT] for more than 2 seconds,
until “TV OUT OFF” is displayed.
8