Kenwood UD-NF7 - Manual (Page 39)

Using Once timer and Daiiy timer
together _____
For example, Once timer can be used to listen to the
radio, and Daily timer can be set as an alarm.
1
Press the [0] button to turn on the power.
2
Set the Daily timer.
• Perform steps 2-10in“Toset the timer
playback”.
3
Set the Once timer.
)rm steps 2 -1
tack”.
C Intervals of 1 minute or longer)
Perform steps 2-10in“Toset the timer
playback”.
4
Press the [O] button to enter the standby
mode.
Tocheckthetimersetting
1
Press [O], and then press and hold down the
[CLOCK/TIMER] button.
2
Within10seconds,pressthe[^M/^N]
button to select Once Timer or Daily Timer,
and then press the [ENTER] button.
3
Within10seconds,pressthe[^M/^H]
button to select “Timer Call”, and then press
the [ENTER] button.
To cancei the timer setting
1
Press [O], and then press and hold down the
[CLOCK/TIMER] button.
2
Within10seconds,pressthe[^^/^H]
button to select Once Timer or Daily Timer,
and then press the [ENTER] button.
3
Within10seconds,pressthe[^^/^N]
button to select “Timer Off”, and then press
the “ENTER” button.
Thetimerwill be cancelled. (Setting will not be
cancelled.)
To use the memorised timer settinc
The timer setting will be memorised once it is entered.
To reuse the same setting, perform the following
operations.
1
Press [O], and then press and hold down the
[CLOCK/TIMER] button.
2
Within10seconds,pressthe[^^/^H]
button to select Once Timer or Daily Timer,
and then press the [ENTER] button.
3
Within10seconds,pressthe[^^/^N]
button to select “Timer On”, and then press
the [ENTER] button.
4
Press the [fi] button to enter the standby
mode.
39