Kenwood UD-NF7 - Manual (Page 43)

CD Player Wi-Fi Connection
Playback does not start. Playback stops in the
middle or is not performed properly.
^The disc is piaced upside down.
^ Does the disc satisfy the standards?
^ is the disc distorted or scratched?
Playback sounds are skipped, or stopped in
the middle of a track.
^ is the unit iocated near excessive vibrations?
^ is the disc very dirty?
^ Has condensation formed inside the unit?
AirPlay/DLNA
No AirPlay icon on AirPlay device or iTunes in
my PC.
^ istheunit joined to the network?
^ is the “Bonjour” service in your Mac/PC enabied
before you open iTunes?
AirPlay/DLNA connection failed with PC.
^ Firewalls and security software must be disabled.
^ Isyournetworkspeedfastenough? You may need
to turn off other devices that are connected to the
router.
Breaking of music streaming.
^ RestartyourAirPlay/ DLNA device orthis unit.
^ Enable the Auto Channel Scan Option on the Wi­
Fi router if available.
^ Enable the Wireless Intelligent Stream Handling
(WISH) option on the Wi-Fi router if available.
^ Enable the Quality of Service (QoS) option on the
Wi-Fi router if available.
^ Other home routers must be turned off.
Wi-Fi network connection failed.
^ Is your router Wi-Fi certified?
^ WPS Pin and WPS-PBC routers is not supported
by this unit.
^ Do not use special characters like '%, #, *’ to
rename your router ortho AirPlay device in the
setting menu.
^ Is the unit placed near a potential source of
interference, such as microwave ovens?
Unable to select tracks. The name of this unit
won’t be displayed on the AirPlay/DLNA
devices.
^ Use an application that support the Digital Media
Server (DMS). Checkthe downloaded softer
about DMS support.
Direct wireless connection has failed.
^ Move this unit closer to the AirPlay/DLNA device.
^ Try another application if playback has failed.
Caution
We do not guarantee that this unit is connected to or
operated correctly with all the applications. Please be
noted in advance.
Resetting the Network Setup
Ifthe Networkfunction operates incorrectly, do the
reset operation as below:
1
Press and hold the [CLEAR] button while
using NETWORK, (about lOseconds)
“Network Clear” will be displayed.
(“Network Clear” won’t be displayed during
playback, and name of the track remains
displayed.)
• This operation will erase the current networksetting.
43