Kenwood UD-NF7 - Manual (Page 30)

Navigating the USB device from the main unit
Operation Main unit Remote control Note
Play ► /II
&
CD/USB
Press in the stop mode.
Stop ■
CD
Press in the playback mode.
Pause ► /II
(3>
CD/USB
Press in the playback mode. Press the [►/M] button to resume
playbackfrom the paused point.
Track up/down
»►!
e 9
Press in the playback or stop mode. If you press the button in
the stop mode, press the [►/M] button to start the desired track.
Fast forward/
reverse
»►! e 9
Press and hold down in the playback mode. Release the button
to resume playback.
To remove USB memory devjc^^^^^
1
To stop playback, press the [CD/USB ■]
button on the remote control, or [■] on main
unit.
2
Disconnect the USB device from the USB/
iPad terminal.
Note
If USB memory device is not connected, “USB No
Media” will be shown on the display.
Caution
You cannot send any data from theunitto the USB
device.
It is recommended to use USB mass storage class
devices with 4 GB or less storage capacity.
Disable security function of the USB device.
When the source is set to “USB”, this unit starts
charring the battery of the USB device.
Disconnect the USB device after stopping playback.
Disconnecting the USB device during playback may
cause some problem of the USB device and its files.
We will not be held liable for the loss of data while
the USB memory device is connected to the audio
system. Please be noted in advance.
30