Connecting other devices and headphones, 1 connecttheheadphonestothephone terminal, To listen to the portable audio player – Kenwood UD-NF7 User Manual
Page 41: Connecting other devices and, Headphones
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Other Devices and Headphones
Headphones and connection code are not included in
this unit.
To listen by using headphong^^^^^
1
ConnecttheheadphonestothePHONE
terminal
• Be sure to turn down the volume before
connecting or putting on the headphones.
• Connecting the headphones deactivates the
speakers.
To listen to the portable audio player
* •
1
Use an audio cable to connect the portable
audio player, etc., to the AUDIO IN terminal.
• When using video equipment, connectthe
audio output to this unit and the video output to
atelevision.
2
Press the [O] button to turn on the power.
3
Press the [AUDIO IN/AUX] button on the
remote control or [INPUT] button repeatedly
on main unit to select “AUDIO IN” function.
4
Play back the connected devices
• If volume level of the connected device is too
high, sound distortion may occur. Should this
happen, lower the volume of the connected
device. If volume level is too low, increase the
volume of the connected device.
41