Kenwood TM-441A User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOTE CONTROLLER RC-20
To change control to the RC-20, connect the RC-20, hold
down the transceiver VFO/M^V key, and turn the power
switch on.
Before starting operation, read the RC-20 In
struction Manual.
Functions that do not operate when the RC-20 is
connected
1. DTSS and paging functions
2. DIM setting function
3. Automatic power-off functions
The other functions are the same as the TM-
231/431/531 functions described in the RC-20
Instruction Manual.
58