Kenwood TM-441A User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Calling all station in the group
1. To call all station in the group, select the memory
number in which the group code is stored. In this
example, the number is stored in number P3.
2. Press the PTT key once or press a key other than
DR/DT or MR/M to display the frequency again.
3. Press the PTT switch.
Group code 789 and your station ID code 111 are
transmitted. A DTMF tone sounds is heard during
transmitting.
44
Calling a specific stationiExample: Call station 3.)
To call a specific station (for example, station 0. 3), use
the following procedure:
1. Select the memory in which the local station code is
stored (in this example, select memory P2.) or Enter
the individual code of the local station in memory 0.
2. Press the PTT key once or press a key other than
DR/DT or MR/M to display the frequency again.
3. Press the PTT switch.
145.660MHz
444*111
,wS.55u p?
iwriii
000
0O0
000^
Local station code 444 and your station ID code 111 are
transmitted. A DTMF tone sounds is heard during
transmitting.