9 drs (digital recording system) operation – Kenwood TM-441A User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5-9 DRS (Digital Recording System)
OPERATION
The optional DRU-1 (Digital Recording Unit) permits
you to manually or automatically record up to a maxi
mum of 8 different voice messages for later playback.
The automatic recording function works in conjunction
with the T.ALT function.
This function can be used with the DTSS or paging
mode.
Press the F key for longer than 1 second, then press the
DR/DT key while the F indicator is flashing. This opera-
DTMF control mode
Automatic Recording
The DRS indicator will flash.
The DRS function can be remotely controlled by an
external DTMF signal. The DRS indicator goes on
continuously.
5-9-1 Before Recording
The recording conditions are preset at the factory for
the following settings:
Tone Quality Level
1
Maximum recording phrase
8
DRS indicator lights in the display
34