Kenwood TM-441A - Manual (Page 41)

The paging function is available when the optional
DTMF unit (DTU-2) is installed.
The paging function is useful to call all stasions a group,
a specific station, or wait for a call from another station
by using DTMF(Duai Tone Multi Frequency signaling.
Example: When station 2 is called
5-10 PAGING
F : 145.660MHz
Your code
145.660MHz
Your code
F : 145.660MHz
Individual code : 222
Station I
F : 145.660MHz
Individual code : 333
Station 2
F : 145.660MHz
Individual code : 444
Station 3
The common group code and individual codes should
be determined in advance. These codes should be from
000 to 999 (3 digits). Unlike DTSS, the code of the calling
station is displayed on the receiver, so the receiver can
identify the calling station.
When called by a local station, the individual code of
the calling station is displayed. When called with a
group code, that group code is displayed.
Paging operation procedure
Set your station code
Tune to frequency of the other station
Enter the paging mode
To call the
station other
Set the code of
station to be called
Transmit
Call
To stand by for a
pager
Stand by
41