Kenwood KA-V9500 - Manual (Page 6)

System connections
Make connection as shown in the diagram. When connecting the related system components, refer also to the
instruction manuals of the related components.
Do not plug in the power lead until all connections are completed.
I Connection of audio components
Cassette deck 1
□
i 1 1 '------------'
□
r 1 ■ 1 { o O Cassette deck 2
□
□
1 fò~òl 1 1 r;- - ' 1 p
o o| 1 r ' r 1 ° ° T O
II» »11 1
□ o 1 1 —! o
External power supply outlets
SWITCHED outlets (total max, capacity 200W):
Connect the power plugs of the tuner, tape deck, or CD player to
these outlets. By leaving the POWER switches of these compo­
nents ON, they will be switched ON-OFF at the same time as the
POWER switch of this unit. Never connect components having a
total combined power consumption of more than total 200 W.
External power
supply outputs
(LJ.
AC outlet for
^some areas
SW1TC(«DT01»L200W MAX. ^
Notes:
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
3. When plugging and unplugging connection cords after connections are complete, be sure to first remove the power cord from the AC
outlet. Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or. damage to the unit.
6 KA-V9500 (En)