Kenwood KA-V9500 - Manual (Page 36)

DSP and DSP.LOGIC playback
■ Playback using preset sound
field patterns
--------------------------------------------------------------------------------------------V
1
Select the DSP or DSP.LOGIC mode.
■ WP
jii).
b
(Remote
^__ / control unit)
2 Select the speaker mode.
ONAJFF Mice
' Refer to page 29.
3 Select the desired preset sound field pattern.
WS“»
b (Remote
control unit)
• The main and sub parameters and parametric equalizers are
adjusted according to the sound field effect patters.
^Adjust the center speaker balance.
I Remote control unit only I
LEVEL/BALANCE
I I
b (Remote
> in case two center speakers are used.
5 Set the delay time {DSP.LOGIC mode only).
I Remote control unit onl^
• The delay time can be set in the range from 0 to 80 ms in
0.5 ms steps.
• Refer to "How to set the delay time" on page 35.
• The delay time cannot be set in the speaker modes which
IMote:
When the mode is changed from SYNTHETIC MOVIE or SYN­
THETIC ARENA to DSP.LOGIC, then the DSP mode is set the unit
automatically set to MOVIE THEATER or ARENA mode.
DELAY TIME key-
DSP, DSP LOGIC keys-
PARAMETER keys-
-Presence mode
keys
-SURROUND
BYPASS key
-MULTI
CONTROLLER keys
-LEVEL/BALANCE key
(CENTER)
■m
a
o 1 pC
F otary encorder knob
To cancel
Press the BYPASS key.
» Be sure to set the bypass mode when Surround playback is not
required,
36 KA-V9500 (En)