Kenwood KA-V9500 - Manual (Page 26)

Parametric equalizer operation
Parametric equalizer
The parametric equalizer is ap equalizer system which can adjust
the center frequency and curve (Q) slope of each frequency band.
With this unit, the center frequency of the BASS band is fixed at
100 Hz and that of the TREBLE band is fixed at 1 0 kHz, but that
of the MIDDLE band can be selected from 250 Hz, 400 Hz, 630
Hz, 1.0 kHz, 1.6 kHz, 2.5 kHz and 4.0 kHz. The slope of the curve
(Q) can be selected between WIDE and NARROW for each of the
BASS, MIDDLE and TREBLE bands. In addition, these equalizer
setting can be given independently to the FRONT and CENTER
speakers.
-------- --- NARROW
I Preparation for creation of equalizer curve
1 Press the PARAMETRIC EQUALIZER key.
WRAMETRIC KVIlLritl EQUALiZER lON/OFFl
- L
\—h
Display : DSP LOGIC mode
n
^____ f (Amplifier)
t The EQ LEVEL indicator is displayed.
(Remote
control unit)
Lights up
T R E ,
2 Select the FRONT or CENTER speakers.
When FRONT is selected When CENTER is selected
T R E «
• Every press alternates FRONT —*■ CENTER.
• The equalizer effect can be applied independently to the front and center speakers. However, in the DSP mode, the equalizer effect
cannot be applied to the center speaker(s).
26 KA-V9500 (En)