Kenwood KA-V9500 - Manual (Page 3)

A
Caution: Read this page carefully to ensure safe operation.
Before applying power
For the U.S.A. and Canada For Austraiia and Europe
Important!
Units shipped to the U.S.A, and Canada are designed for opera­
tion on 120 voits AC only.
Safety precaution for a Polarized AC plug
However, some products may be supplied with a non-poiarized
plug.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
For the United Kingdom
important!
Units shipped to the U.K. are designed for operation on
240 volts AC only,
The mains plug must be removed from the wall socket prior
to any internal examination.
The wires in this mains lead are coloured in accordance with
the following code:
Blue ....................................................... Neutral
Brown.................................................. . Live
The wires in this mains lead must be connected, to the termi­
nals in the plug as follows;
Wire colour
Plug terminal marking
Blue .............................. ................. . N or Black
Brown ................................................... L or Red
2. if a 3-pin plug with earthing contact is used, no wire must
be connected to the E termina!.
Important!
Units shipped to Australia are designed for operation on 240 V
AC only.
Units shipped to Europe are designed for operation on 220 V
AC only.
For other countries
Important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear panel.
Refer to the following paragraph for the proper setting of this
switch.
AC voltage selection
This unit operates on 110-120 or 220-240 volts AC, The AC
voltage selector switch Type A or Type B on the rear panel is
set to the voltage that prevails in the area to which the unit
is shipped. Before connecting the power cord to your AC out­
let, make sure that the setting position of this switch matches
your line voltage. If not, it must be set to your voltage in ac­
cordance with the following direction.
Note:--------———------------------------------- -------—_____
Our warranty does not cover damage caused by excessive line
voitage due to improper setting of the AC voltage selector
switch,
Type A
Type B
AC voltage selector switch
AC110- AC220V- AC240V-
AC110V-^^AC220V-
120V- 240V-
Move switch lever to match your line voltage with
a small screwdriver or other pointed tool.
This unit has two AC voltage selector switches.
Be sure to set both of them together whenever
the AC voltage switching is required.
Safety precautions
WARNING TO PREVENT FIRE OR SHOCK HAZARD,
TO RAIN OR MOISTURE. DO NOT EXPOSE THIS APPLIANCE
A 1 1 A
CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SER­
VICING TO QUALIFIED SERVICE PERSONNEL. A
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOL­
TAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
A
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN­
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
KA-V9500 (tn) 3