beautypg.com

Select one of the preset patterns, Set the main parameters, Adjust the parametric equalizer – Kenwood KA-V9500 User Manual

Page 37: Notes, Tv display, Main parameter display, Sub parameter display, I creating user's own sound field, I 5^8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

I Creating user's own sound field

l Remote control unit onlvT

Based on one of the preset patterns built in the unit, it is also possible to create your own sound field by adjusting

desired parameters.

(5

Select one of the preset patterns.

3

Set the main parameters.

The following parameters are switched in the cycle of © -

(D every time the MAIN key is pressed.

(T) Room Size setting

from 0.Б to 2.0 in steps of 0.1.

• Adjust in the range

© Wall setting

PARAMETER

I 5^8 [

• Adjust in the range from 1 to 1 6 kHz in 1 kHz steps.

© Position setting

PARAMETER

_____

L1

's.

Adjust in the range from 1 to 100 in steps of 1.

Adjust the parametric equalizer.

Refer to page 26 for the adjustment procedure.

In the DSP mode, the center parametric equalizer is not effective.

Notes:

1, When any other sound pattern key is pressed, the whole setting

of the parameter and parametric equalizer is canceled and

returned to the initial condition which is suitable for the sound

field pattern. When it is required to store the setting you created

in memory, use the Surround Information Memory function

(refer to page 38}.

When any other operation key is pressed, the parametric

equializer is not canceled.

2. Parameters "Reverb Level", "Reverb Time" and "Reverb Densi­

ty" cannot be varied In modes "MOVIE THEATER", "JAZZ

CLUB",

"DISCOTHEQUE",

"STADIUM"

and

"SYNTHETIC

MOVIE THEATER".

Set the sub parameters.

The following parameters are switched in the cycle of©^@-

(D 0

© every time the SUB key is pressed.

© Early Reflection Level setting

I MAIM I

• Adjust in the range from 0 to 100 in steps of 1.

© Early Reflection Time setting

I MAIN I

• Adjust in the range from 1 to 60 ms in 1 ms steps.

© Reverb Level setting

I MAIN I

• Adjust in the range from 0 to 100 in steps of 1.

© Reverb Time setting

• Adjust in the range from 0.5 to 4.0 sec. in 0.1 sec. steps.

© Reverb Density setting

PARAMETER

I МАШ I

► Adjust in three steps of High, Mid or Low.

TV display:

Main parameter display

Sub parameter display

♦ SUB PARAMETER »

* MAIN PARAMETER *

E.Reflection Level: 70

Room Size

1.5

The parameter whose

E,Ref lection Time ' 30ms

VfaUifreq.)

5kHz

colon is blinking

Reverb Level : 70

Posit ion

40

can be set.

Reverb Time -Z 3s

Reverb Density :High

KA-V9500 {En)

37