Compaq GS320 - Manual (Page 97)

Getting Started with the System Management Console 7-3
If the administrator account is reconfigured to use a password, the Log On
dialog box always displays when the PC powers up. You can give that account a
password by following these instructions.
1. Press Ctrl+Alt+Del. The Windows NT Security window displays (Figure 7–
1).
2. Click Change Password… The Change Password dialog box displays (Figure
7–2).
3. Enter the old password and the new one, and enter the new password again
to confirm it. (The passwords display as asterisks.) Click OK.
Figure 7–2 Change Password Dialog Box