Compaq GS320 - Manual (Page 30)

2-4 SMC Installation and User's Guide
2.2 Installation Sequence
Before installing the terminal server, check that the keyswitch and all
AC input box breakers on the GS80/160/320 system are turned to Off.
The following is the recommended sequence of installation for the GS80/160/320
system and the system management console:
1. Set up the GS80/160/320 hardware. See the AlphaServer GS80 Installation
Guide or the AlphaServer GS160/320 Installation Guide.
2. Set up the SMC PC and, with the GS80/160/320 keyswitch turned to Off,
turn on the breakers on the GS80/160/320 system cabinets and I/O cabinets
(Section 3.1 or Section 4.1).
3. Make the SMC cable connections (Sections 3.2 through 3.4 or Sections 4.2
and 4.3).
4. Configure the SMC software and verify communication from the system
management console to the system control manager (Chapter 5).
5. Optionally, configure the SMC for remote use (Chapter 6)
6. Power up the GS80/160/320 system (Chapter 6).