Compaq GS320 - Manual (Page 57)

Configuring the SMC Software 5-5
1. Open the Windows Control Panel: From the Start menu select
Settings|Control Panel.
2. Double-click the Network icon. The Network dialog box displays with the
Identification tab selected.
3. Click the Change… button. The Identification Changes dialog box displays
(Figure 5–3). Check that the box labeled Computer Name correctly identifies
the SMC system as a management station on the corporate network. (In the
example shown in Figure 5–3, that name is MySMC.) If it does not, enter
the correct name. Click OK.
4. The system can be a member of a workgroup or a domain. (If you are unsure
which it should be, ask the network administrator.) Select the appropriate
option button and enter the workgroup or domain name.
NOTE: The computer name entered in step 3 cannot be GSSMC1. This name is
reserved for the terminal server.