Sharp VIEWCAM VL-WD650U - Manual (Page 93)

Card Playback
It is possible to play back and view still images
recorded on a SmartMedia card on the LCD
monitor.
Media Selection switch
1 Open the LCD monitor and adjust the
angle.
2
3
Set the Media Selection
switch to CARD.
Hold down the Lock button and set the
Power switch to VCR.
• The images recorded on the
SmartMedia card are displayed in a
thumbnail format.
Total thumbnail pages
f
Lock button
A.
1 ------
------- 4-1
O "Cl/'?
ORMAL
Page number
N01
,
100
-
0006
,
Image number
Press ◄◄ or ►► on the Operation button
to move the selection frame to the
desired image.
• Each time you press or the
selection frame moves backward or
forward.
Selection frame
Notes:
• You can display a thumbnail of the previous
(or next) 6 images by pressing
■*«
(or ►►)
when the selection frame is on the image at
the top left (or bottom right).
• Holding down •« or increases the
speed of motion of the selection frame.
Press ►
/ II.
• The selected image is displayed In full­
screen.
Available Operations during Full­
screen Display
• You can display the full-screen picture of the
previous or next image by pressing or
• To return to a thumbnail of the images,
press ■ .
Note:
• Depending on the amount of data for the
recorded image, the resolution setting indicator
displayed during playback may not match the
resolution setting used during recording.
5 i
® “
78