To pause audio dubbing, To quit audio dubbing, If you wish to change the dubbed audio – Sharp VIEWCAM VL-WD650U User Manual
Page 84: Or dub additionai scenes, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Features
Playback
Audio Dubbing
1
Play back the recorded Mini DV cassette
and locate the tape position where you
wish to start audio dubbing.
2
Press
►
/ II to pause playback.
3
Press the MENU/DISPLAY button until
the menu screen appears.
4
Select , then press ►► on the
Operation button. Select “AUDIO DUB”
(d)), then press ►► (®).
• The audio dubbing screen appears.
—|C
2
)
CTirariMiHiM»
' AUDIO
PIC. EFFECT
PB EFFECT
MULTI FRAME
5
Press ◄◄ to begin audio dubbing.
Record your narration.
s
AUDI0U2
AUDIO DUB
CANCEL [MENU/DISPLAY] S AUDIOU-2 AUDIO DUB ^START To pause audio dubbing Press «. To quit audio dubbing Press the MENU/DISPLAY button. The audio dubbing screen disappears. if you wish to change the dubbed audio or dub additionai scenes 1 Press the MENU/DISPLAY button to turn off the audio dubbing screen. 2 Repeat steps 1 to 5 above. Notes: • Audio dubbing cannot be used with record ings made in LP mode. • It is recommended that you use Audio Dubbing only with recordings made with this camcorder. Use of recordings made with other digital video equipment may result in poor audio quality. • Audio dubbing will automatically pause if the original audio changes from 12-bit mode to 16- bit mode or vice versa. Press to resume operation. • Audio dubbing will automatically stop if a portion recorded in LP mode is encountered. • You can play back the dubbed audio and the original audio together or separately (see page). 69
"Selecting the Audio Playback Mode" on next