Sharp VIEWCAM VL-WD650U - Manual (Page 23)

NO
MEMORY CARD
The SmartMedia card is not inserted or is inserted improperly. Check
how the card is inserted (see page 73).
MEMORY CARD
FULL
The capacity of the SmartMedia card is full and cannot store any more
images. Delete unnecessary images (see page 81) or replace the
card with a new one (see page 73).
NO DATA ON
MEMORY CARD
The SmartMedia card has no images recorded in the format the
camcorder can recognize.
MEMORY CARD
ERROR
The images in the SmartMedia card are corrupted or recorded in a
format which is not compatible with this camcorder. Format the card to
use it with this camcorder (see page 77).
FORMAT
MEMORY CARD
The SmartMedia card has not been formatted with this camcorder.
Format the card (see page 77).
MEMORY CARD
PROTECTED
A SmartMedia card with a write-protect seal is inserted. Remove the
write-protect seal to record images on the card (see page 89).
DATA
PROTECTED
You are trying to delete a protected image. Cancel the protection
setting (see
page 80).
MEMORY CARD
READ ERROR
The selected image cannot be read by this camcorder. Format the
card to use it with this camcorder (see
page 77).
CANNOT
STORE DATA
The SmartMedia card cannot record any data due to a problem with
the card or data on the card. Replace the SmartMedia card (see
page 73).
S,
§
Note:
indicates a flashing display.