Demonstration mode – Sharp VIEWCAM VL-WD650U User Manual
Page 108
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Appendix
Demonstration Mode
You can watch a brief demonstration of the
special camcorder features in Demo mode.
If the demonstration appears on the screen
when you turn on the camcorder for the first
time, cancel the Demo mode to use your
camcorder.
SUPER CAT'S EYE switch
MENU/DISPLAY button
Power switch
Operation button
Note:
• The demonstration is only displayed in English.
Watching the Demonstration
1
Remove the Mini DV cassette from the
camcorder (see page
1 2
), and set the
SUPER CAT’S EYE switch to OFF.
2
Hold down the Lock button
-
and set the Power switch to j .■■■'.
CAMERA.
‘
ll'^
Lock button
Press the MENU/DISPLAY button until
the menu screen appears.
Select ETC, then press ►► on the
Operation button. Select “DEMO MODE”
(d)), then press ►► (®).
-l@
REMOTE
SOUND
TIME CODE
TC OUT
I AM :Ai
m
K
5
Press ■ or ►/ II to select “ON”, then
press
I
on
DEMO MODE
D Set the Power switch to OFF, then hold
down the Lock button and set the Power
switch to CAMERA.
• The demonstration begins.
Canceiing Demo Mode
1
During the demonstration, press
the MENU/DISPLAY button to
pause the demonstration.
2
Select ETC, then press ►► on the
Operation button. Select “DEMO
MODE”, then press
3
Press ■ or ►/II to select “OFF”, then
press
Ill l|T|fll|T|fl1l1 r
4
Press the MENU/DISPLAY button to
turn off the menu screen.
Note:
• The demonstration will pause if you press the
MENU/DISPLAY button. If you leave it for 60
seconds, or turn the power off temporarily and
then set the Power switch to CAMERA, the
demonstration will begin again.
93