Sharp VIEWCAM VL-WD650U - Manual (Page 41)

Selecting the Camcorder Mode
This camcorder includes functions for use as both
a video camera for recording and playing back
images on tapes and as a digital still camera for
recording and playing back still images on
SmartMedia cards. One of the follow/ing
camcorder modes needs to be set before starting
any operations.
Media Selection switch
Camcorder modes
TAPE-CAMERA mode TAPE-VCR mode
For recording motion and still images on For playing back or editing motion and still
tapes. images recorded on tapes.
1
Set the Media Selection ^
1
Set the Media Selection ^
switch to lAHb. (I II switch to TAPE. ([ I
CARD^^------------- ------------------------ ITAPE
2
Hold down the Lock button -
2
Hold down the Lock button >
and set the Power switch to | /,■ f and set the Power switch to /1 \
CAMERA. VCR.
\ w
Lock button Lock button
CARD-CAMERA mode CARD-VCR mode
For recording still images on SmartMedia For playing back still images recorded on
cards. SmartMedia cards.
1
Set the Media Selection ^
1
Set the Media Selection ^
switch to CARD. f ] | switch to CARD. f~ h
CARD »■ TAPE CARD=S£!^I AHb
2
Hold down the Lock button \
2
Hold down the Lock button ^
and set the Power switch to | | and set the Power switch to ^
CAMERA.
VCR-
\ w
Lock button Lock button
Caution:
• Do not change the camcorder mode by operating the Media Selection switch during recording or
playback, as this may cause damage to the tape or SmartMedia card.
26