Selecting daylight saving time, To reset to standard time – Sharp VIEWCAM VL-WD650U User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Features
Camera Recording
Selecting Daylight Saving
Time
Perform the procedure below to advance the
clock of the camcorder one hour to daylight
saving time.
1
AUTO
30min SP
JUN. 2.2002
10:30AM
2
Press the MENU/DISPLAY button until
the menu screen appears.
Press the MENU/DISPLAY button to
turn off the menu screen.
• The )*' indicator appears when the date/
time is displayed.
Set the camcorder to TAPE-CAMERA or
CARD-CAMERA mode.
S 30tnin SP
JUN.
2.2002
1*1 11;30AM
Daylight saving time indicator
To reset to standard time
Select “OFF” in step 4 above.
Select O, then press ►► on the
Operation button. Select “DYLT SAVE”
(d)), then press ►► (®).
AKTA
DYI 1 SA\/F 3SH
setting
on
_
I2H/24H
4
Press ■ or ►/ II to select “ON”, then
press -*◄.
• The time automatically changes to daylight
saving time.
D Y L T S A V E
lUN
59