Sharp VIEWCAM VL-WD650U - Manual (Page 54)

Useful Features
Camera Recording
I
Still Recording on Tape
You can record still images of subjects with
normal sound on a tape by selecting one of two
still recording modes.
Type of Still Recording modes
SNAP: A still picture is recorded for 6 seconds.
STILL: A continuous still Image Is recorded.
Selecting Still Recording Mode
1
Set the camcorder to TAPE-CAMERA
mode.
2
Press the MENU/DISPLAY button until
the menu screen appears.
3
Select (S, then press ►► on the
Operation button. Select “SNAP EFF.”
(d)), then press ►► (®).
HOTO
•JAP
^ SNAP
FT I .
ZOOM PHOTO SHOT
I API SPEED P-IN-P
3: 9 9 FRAMES
16 FRAMES
4
Press
■
or ►/II to select “OFF”, then
press
5
Press ► / II (®) to select “PHOTO
SNAP”, then press ►► (®).
: ; PHOTO SNAP
SNAP EFF.
f| DGTL ZOOM
; J TAPE SPEED
f-, 16:9
6 Press ■ or ►/ II to select the desired
still recording mode, then press ◄◄.
I S T I L L P H O T O S N A P
7
Press the MENU/DISPLAY button to
turn off the menu screen.
Using Still Recording
Set the camcorder to TAPE-CAMERA
mode.
1
2
In Recording Standby
mode, press the STILL
button.
• A still image of the subject
is displayed.
Press the REC START/STOP
button.
• The still Image of the subject
will be recorded.
In SNAP mode, the camcorder returns to
Recording Standby mode after recording
a still Image for 6 seconds.
To pause recording
Press the REC START/STOP button.
To cancel the still image
In SNAP mode, press the STILL button while
the camcorder Is In Recording Standby
mode.
In STILL mode, press the STILL button.
Notes:
• Still Recording can also be used during
recording by pressing the STILL button.
• The picture quality in Still Recording mode will
be slightly lower than normal pictures.
39