Configuring software for pc connection, Notes – Sharp VIEWCAM VL-WD650U User Manual
Page 86
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Features
Playback
Configuring Software for
PC Connection
This camcorder can transfer still playback
images in TAPE-VCR mode or still images in
TAPE-CAMERA and CARD modes to a
personal computer by using the supplied Video
Capture Software.
System Requirements
• IBM PC/AT or compatible with Intel* Pentium*
133 MHz or faster processor
• Microsoft Windows* 95B, Windows* 95C,
Windows* 98, Windows* 98 Second Edition,
Windows* 2000 Professional*, or Windows*
Me operating system
• 32 MB or more of RAM
• 9 MB minimum of available hard-disk space
• SVGA (800
X
600 pixels) color display
monitor with 16-bit color or higher
• CD-ROM drive (for installation)
• RS-232C serial port
• Mouse or other pointing device
• In the Windows* 2000 Professional environ
ment, only the system administrator has
installation access rights.
Installing the Software
1
Turn on the PC and start up Windows.
2
3
4
5
6
Connecting the camcorder to a
Personai Computer
1
Turn off the PC.
2
Connect the camcorder as shown below.
• Before connecting the camcorder to the
PC, make sure that the PC power is off
to insure that images are transferred
properly.
To RS-232C port
(D-sub 9-pin port)
PC connecting cable (supplied)
Insert the CD-ROM of the Video Capture
Software into the CD-ROM drive.
Double click on the “My Computer” icon.
Double click on the “CD-ROM” drive
icon.
Double click on the “Setup.exe” file.
Follow the instructions as they appear
on the PC monitor until the installation is
complete.
7
Restart the PC.
To PC connection jack
3
Turn on the PC.
Notes:
• It is recommended to use the AC adapter/battery
charger as a power source for extended periods
of use.
• Images with the following functions cannot be
transferred to a personal computer.
—TAPE-VCR/CARD-VCR mode: Playback Zoom,
Picture Effect Playback
—TAPE-CAMERA/CARD-CAMERA mode: Digital
Zoom, Digital Picture Effects, Scene Menu
• Using a commercially available floppy disk
adapter or PC card adapter, it is possible to
directly transfer still images on a SmartMedia
card to a PC (see page 85).
• To edit still images transferred with the Video
Capture Software, use a commercially available
image editing software.
71