Selecting the audio playback mode, Audio 1+2, Audio 1 – Sharp VIEWCAM VL-WD650U User Manual
Page 85: Audio 2, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Audio Playback
Mode
You can select any of the following audio
playback modes.
Audio 1+2
• 12-bit recording in stereo (Audio 1 and Audio
2
channels)
• 16-bit recording in stereo (left and right
channels)
Audio 1
• 12-bit recording in stereo (Audio 1 channel
only)
• 16-bit recording in mono (left channel only)
Audio 2
• 12-bit recording in stereo (Audio 2 channel
only)
• 16-bit recording in mono (right channel only)
1
Play back a Mini DV cassette with
dubbed audio.
2
Press the MENU/DISPI-AY button until
the menu screen appears.
3
Select , then press ►► on the
^------ button. Select “AUDIO” (®),
- (®).
Operation
then press
Press ■ or ►/ II to select the desired
audio playback mode, then press
.
A U D I O
1 + 2
Press the MENU/DISPLAY button to
turn off the menu screen.
• The selected audio playback mode
indicator is displayed.
|{
audio
Audio playback
mode indicator
Note:
• The audio playback mode indicator, "AUDIO", is
displayed in different colors depending on the
recording mode (
12
- or 16-bit) used for the
recording being played back. A white display
indicates
12
-bit recording mode, and a green
display, 16-bit recording mode.
70