Brother FAX-200 - Manual (Page 33)

2 4
V. SETTING USER SWITCHES
User Switches control a number of key parameters of the unit's operation, such as: Resolution,
Contrast, Audio Beeper, Transmit Report, Password Transmission, Automatic Answer and the
Number of Rings on which the unit will answer automatically.
Press "7" in the FUNCTION mode. The unit enters USER SWITCH SELECTION
MODE. The LCD will display:
USER SW(0-9)? ----- AUTO ANS
-------------------------------- ^ PASSWORD
Pressing 1, 2, 3, 5, 6, 7 (4, 8, 9, 0 are not used) will allow you to set the User Switches.
A. Setting the Resolution
1. Press "1" in the USER SWITCH SELECTION MODE. The LCD will display:
RES: STD ■AUTO ANS
PASSWORD
2
. Use STANDARD to transmit typewritten or printed materials. Use FINE for
detailed drawings or detailed text. Use PHOTO when you need to transmit an
image with many shades, such as a photograph, a colored original, etc. Please
note that the transmission speed is highest at STANDARD resolution, slower at
FINE and quite slow in PHOTO. Thus, use PHOTO only when warranted.
NOTE: The factory setting is STANDARD resolution.
3. Select the RESOLUTION mode using the cursor keys. Choose from the following
displayed RESOLUTION modes:
RES: STD • AUTO ANS
■ PASSWORD
RES: FINE ■AUTO ANS
■ PASSWORD
RES: PHOTO -AUTO ANS
■- PASSWORD
4. If you press SET , the resolution is selected and the display returns to the
USER SWITCH SELECTION MODE.
If you press
NEXT, the resolution is selected and the display proceeds to the
next user switch (SET THE CONTRAST).
If you press STOP, the display returns to the standby mode without
registration.