Brother FAX-200 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

14
The unit will start dialing automatically.
When you hear the fax tone, press
START.
A completion tone will sound for one
second after the transmission is completed. The LCD will revert to the standby mode.
01/01/89 00:00
■ AUTO ANS
• PASSWORD
b) Automatic transmission
• Insert up to 5 documents into the feeder face down. The LCD shows:
FAX/COPY READY
-AUTO ANS
^ PASSWORD
Press # and the desired 2-digit code using the ten key pad.
Example: If 03 stands for 201 981 0300, press "#", "0",and "3", and the unit will dial
201 981 0300. The LCD shows:
FAX:#03
- AUTO ANS
■- PASSWORD
After one second, if you have already registered the receiver's company name, the LCD
shows the receiver's ID:
FAX:BROTHER INTE
-AUTO ANS
- PASSWORD
If you have not registered the receiver's company name, the LCD shows the registered
receiver's facsimile telephone number:
FAX:201P981P0300
- AUTO ANS
- PASSWORD
Press
START.
The unit will start feeding a document and then start dialing, and initiate
the transmission automatically. A completion tone will sound for one second after the
transmission is completed. The LCD will revert to the standby mode.
01/01/89 00:00
■ AUTO ANS
• PASSWORD
3.
Manual dialing
a) Manuai transmission
• Insert up to 5 documents into the feeder face down. The LCD shows:
FAX/COPY READY
•AUTO ANS
■ PASSWORD
Press
HOOK
or pick up the handset. The LCD shows:
FAX:
•AUTO ANS
■ PASSWORD