Brother FAX-200 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1 5
Press
MAN.DIAL.
Dial the desired number using the ten key pad.
FAX:201981030
•AUTO ANS
• PASSWORD
If your desired number is more than 11 digits, the display will scroll, e.g.:
AX:201981030012
•AUTO ANS
• PASSWORD
When you hear the fax tone, press
START.
A completion tone will sound for one
second after the transmission is completed. The LCD will revert to the standby mode:
01/01/89 00:00
•AUTO ANS
■ PASSWORD
b) Automatic transmission
• Insert up to 5 documents into the feeder face down. The LCD shows:
FAX/COPY READY
• AUTO ANS
• PASSWORD
Press
MAN.DiAL.
Dial the desired number using the ten key pad.
FAX:201 P981P030
— AUTO ANS
■- PASSWORD
If your desired number Is more than 11 digits, the display will scroll, e.g.:
AX:201P981P0300
- AUTO ANS
PASSWORD
Press
START.
The unit will start feeding a document and then start dialing, and initiate
the transmission automatically. A completion tone will sound for one second after the
transmission is completed. The LCD will revert to the standby mode.
01/01/89 00:00
AUTO ANS
PASSWORD
4. Redial button
When the telephone number was dialed, the telephone number dialed will be registered in
REDIAL
button automatically.
If the number is busy in Automatic transmission, set the document in the feeder again.
Document will remain in the feeder in case of Manual transmission. Press
HOOK
or pick up the
handset and then press
REDIAL.
The unit will redial the last number dialed. After hearing fax
tone, press
START.