Brother FAX-200 - Manual (Page 20)

11
BASIC OPERATIONS
I. THE COPY MODE
The easiest way to start using the unit is to try out the COPY MODE. To make a copy, follow
the simple instructions below:
1.
2
.
3.
4.
Make sure the unit is plugged in and that the LCD is in the standby mode
Insert the document you wish to copy into the guide of the unit, face DOWN.
The LCD will display:
FAX/COPY READY
■AUTO ANS
■ PASSWORD
Press START/COPY.
When the unit completes copying the document, the original will be completely
free of the unit. The copy will be cut automatically.
NOTE 1: FINE mode is set automatically while the FAX-200 is functioning as a copier.
NOTE 2: Warnings related to copying are on page 17.
NOTE 3: If you wish to make a copy in PHOTO mode, choose PHOTO in the TEMPORARY
SETTING, (seep.28)
II. HOW TO TRANSMIT DOCUMENTS
A. Preparing to transmit documents
You can start using the unit once it is plugged in, connected to the telephone network, has
paper inside of it and the LCD is in the standby mode. If you are satisfied with the factory
settings for various parameters (and, most of the users hardly ever have to change these
settings), you can start using the machine immediately.
Basically, the only difference between transmission and copying is that for transmission
you must dial a telephone number before pressing the START/COPY button!
The only programing most users do is to set the date and time and to program their fax number
and name that they appear on the received document. All other programming can be
postponed for when you need some specific capability.
Also, bear in mind that the FAX-200 has an LCD which will display helpful prompts.
Furthermore, you can abort sending a document by pressing the STOP button.