Brother FAX-200 - Manual (Page 22)

1 3
Press the desired one-touch number using the ten key pad. If you have already
registered the receiver's company name, the LCD shows the receiver's ID:
FAX:BROTHER INDU - AUTO ANS
-PASSWORD
If you have not registered the receiver's company name, the LCD shows the registered
receiver's facsimile telephone number:
FAX:052P263P583 AUTO ANS
PASSWORD
Press START. The unit will start feeding a document and then start dialing, and initiate
the transmission automatically. A completion tone will sound for one second after the
transmission is completed. The LCD will revert to the standby mode.
01/01/89 00:00
■AUTO ANS
• PASSWORD
2. Speed-dialing
a) Manual transmission
• Insert up to 5 documents into the feeder face down. The LCD shows:
FAX/COPY READY ■AUTO ANS
■ PASSWORD
Press HOOK or pick up the handset. The LCD shows:
FAX: ■AUTO ANS
• PASSWORD
Press # and the desired 2-digit code using the ten key pad.
Example: If 03 stands for 201 981 0300, press "#", "0",and "3", and the unit will dial
201 981 0300. The LCD shows:
FAX:#03 -AUTO ANS
■- PASSWORD
After one second, if you have already registered the receiver's company name, the LCD
shows the receiver's ID:
FAX:BROTHER INTE - AUTO ANS
- PASSWORD
If you have not registered the receiver's company name, the LCD shows the registered
receiver's facsimile telephone number:
FAX:201P981P0300 ■ AUTO ANS
• PASSWORD