1 .temp.settings, Rt7setup~"sysfeh ), Remote act.:0n – Brother IntelliFax-680 User Manual
Page 50: Select < > & set, Remote act, Deact . code :£s1 ), F 5: remote code ), Using remote codes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECEIVING FAXES AND OTHER CALLS
Using Remote Codes
If you are on an external phone (or extension phone), and you get an incoming fax call, you can
transfer the call back to your fax machine by entering a remote activation code. In the same
situation, if you get a telephone call from someone who requests that you switch on your fax, you
can transfer the call back to your fax machine with this code. Also, you can deactivate the fax
machine with another remote code during the F/T ringing from extension phone. In essence you
have one remote code to activate your fax machine and one remote code to deactivate it.
T h e remote
code to activate is
and the remote code to deactivate is
Ifyuu waiitto set your
own code, see the following section, “Registering Remote Codes”,
FOR YOUR INFORMATION
Limitation of Using External (or Extension) Phones
1. If you accidentally pick up an extension phone when a fax is coming in, you may
disrupt the transmission or render some portions unreadable.
2. The remote activation and deactivation code may not work with some telephone
systems or telephone sets.
Registering Remote Codes
1. Press
FUNCTION.
2. Press
7.
3. Pres.s
5.
4. Press -4— (left arrow) or —► (right
arrow) to choose ON or OFF.
Example: ON.
5. Press
SET.
6. Enter new remote code to activate.
(Factory setting is
7. Enter new remote code to deacti
vate. (Factory setting is
8. Press
STOP
to exit.
{
0 9 / 1 2 / 1 9 9 3 1 5 : 2 5 1
1 . T E M P . S E T T I N G S !
r T 7 S E T U P ~ " S Y S f E H )
c
r 5 , R E M O T E C O D E
R E M O T E A C T . : 0 N
( S E L E C T < > & S E T ]
:)
R E M O T E A C T , «
:=K51
D E A C T . C O D E : £ S 1 )
f
5 : R E M O T E C O D E
)
7-5