Status of lcd display, The fit switch (fit mode), Setting the fit ring time – Brother IntelliFax-680 User Manual
Page 48: Press, Receiving faxes and other calls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

■
RECEIVING FAXES AND OTHER CALLS
The FIT Switch (FIT Mode)
Incoming Call
The fax machine
picks up after ring
time elapses.
All extensions in the home
will ring for 1-4 rings
(user selectable).
The fax machine picks up
the call and automatically
detects whether a fax
or voice call.
Fax call
Fax reception is
automatically
activated.
The fax message
is received.
The caller may
hang up.
Voice call
Only the fax handset
rings, thus signaling
you to pick up.
The handset will ring
between 10-60
seconds
( user selectable).
The Caller stays
on the line through
the entire 10-60 second
ring delay.
The fax mode
is activated.
You pick up any
extension within ring
time selection.
You must manualiy
determined if it is
a voice or fax call.
Fax call
Voice call
A) If you are at the
fax machine, press
START.
B) If you are at an
extension phone,
you can transfer
the fax call to the fax
unit by pressing your
remote activation code
(three digits).
Talk as
normal.
You pick up
the fax handset.
Talk as normal.
The caller may hang up.
Setting the FIT Ring Time
You can specify the maximum time you want the fax machine to ring in case of telephone. There
are four predefined settings; 10, 20, 30 or 60 seconds.
1. Press FUNCTION.
2. Press
6
.
STATUS OF LCD DISPLAY
t ; 0 9 / 1 2 / 1 9 9 3
J
C T T
t e m p
j
S E T T I N G S 1
r ^ T E L O P T I O N S
7-3