Brother IntelliFax-680 - Manual (Page 17)

HUW lU USb ON-SCREEN PR
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
4. SET AUTO
DIAL 2. SPEED-DIAL
If you register names and numbers as Speed-
Dial numbers, you can dial a number auto­
matically just by pressing SPEED DIAL and
a two-digit number. (40 locations for FAX-
680, 10 locations for FAX-600)
4-6
1. SMOOTHING
Smoothing enhances the appearance
of
incoming faxes.
If you set SMOOTHING to ON, you can
receive messages with smoothing.
ON/OFF
ON 7-8
2. BEEPER
You can adjust the volume of the beeper with
this fimction.
OFF/LOW/HIGH
LOW 4-1
5. USER
OPTIONS
3. COVERPAGE
If you set COVERPAGE to ON, you can send
your documents with a Cover Page generated
by your machine. When the COVERPAGE
setting is ON, you can select a Cover Page
comment.
ON/OFF
OFF 6-13
4. GRAY SCALE
(Only for FAX-
680)
You can select a GRAY SCALE level.
16/32 level
32 6-11
1. TONE/PULSE
There are two different dial types and you
must select the type of signal suitable
for your
telephone.
TONE/PULSE
TONE 4-1
2. RING DELAY
The number of rings that will occur before F/
T or AUTO Answer Mode selections are acti­
vated.
0/1/2/3/4 rings
2 7-2
6. TEL
OPTIONS 3. AUTO REDIAL
If you set AUTO REDIAL to ON, your ma­
chine will automatically re-dial the last
number called in the event the number was
busy or the call failed for some other reason.
ON/OFF
ON 6-5
4. SPEAKER
VOLUME
You can set the speaker volume.
OFF/LOW/HIGH
LOW 7-8
5. F/T RING TIME
F/T RING TIME sets the time for simulated
ringing in F/T mode.
10/20/30/60 seconds
20 7-3
6. RING VOLUME
The settings are OFF/LOW/HIGH:. HIGH 7-9
7. SETUP
SYSTEM 1. DATE/TIME
If you enter the date and time in 24-hour
format, the LCD will display the date and
time and will also be printed on outgoing
faxes.
01/01/1994
00:00
4-2
3-2