Pioneer SUPER TUNERIII DEH-P8500MP User Manual
Deh-p8500mp, Operation manual mode d’emploi, Super tuherh
Table of contents
Document Outline
- Operation Manual Mode d’emploi
- Before You Start
- 0 What’s What
- 0 Power ON/OFF
- To establish a safe level:
- Decibel
- THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
- Notes
- ((( XAA »)
- Notes
- • Press RESET on the head unit with a pen tip or other pointed instrument.
- 1 Press OPEN to open the front panel.
- 2 Slide and remove the front panel toward you.
- 3 Put the front panel into the protective case provided for safe keeping.
- 1 Make sure the inner cover is closed.
- 2 Replace the front panel by clipping it into place.
- J C
- m
- (D EQ button
- (D SOURCE button
- © PAUSE button
- ® CLOCK button
- ® OPEN button
- @ A/T/^/^ buttons
- ® BAND button
- ® 1-6 buttons
- ® VOLUME
- dJ ENTERTAINMENT button
- ® AUDIO button
- ® FUNCTION button
- ® DISPLAY button
- ^ VOLUME button
- ^ CD button
- D PAUSE button
- ^ TUNER button
- ^ ATT button
- • Press SOURCE to turn the unit on.
- • When using the head unit, press SOURCE to select a source.
- • Press SOURCE and hold until the unit turns off.®
- • When using the remote control, press TUNER or CD to select a source.
- Notes
- ® Stereo (ST) indicator
- ® LOG indicator
- (3) Band indicator
- ® Preset number indicator
- (5) Frequency indicator
- 1 Press SOURCE to select the tuner.
- 2 Use VOLUME to adjust the sound level.
- 3 Press BAND to select a band.
- 4 To perform manual tuning, press ◄ or ^ with quick presses.
- 5 To perform seek tuning, press and hold
- © Function display
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to display the function names.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Local.
- 3 Press A to turn local seek tuning on.
- 4 Press ◄ or ► to set the sensitivity.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select BSM.
- 3 Press A to turn BSM on.
- Note
- ® Track number indicator
- ® Play time indicator
- 1 Press EJECT.
- 2 Insert a CD into the CD loading slot.
- 3 Use VOLUME to adjust the sound level.
- 4 To perform fast forward or reverse, press and hold ◄ or ►.
- 5 To skip back or forward to another track, press ◄ or ►.
- 4 Press T to turn repeat play off. ? :
- ® Function display
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to display the function names.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Repeat.
- 3 Press A to turn repeat play on.
- 1 Press OPEN to open the front panel.
- 1 Press OPEN to open the front panel.
- 7 Move the cursor to the last position by pressing >■ after entering the title.
- 8 Press BAND to return to the playback display.
- Notes
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY.
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY.
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY and hold until the title begins to scroll to the left.
- ® MP3/WMA indicator
- ® Folder number indicator
- @ Play time indicator
- (4) Track number indicator
- 1 Press EJECT.
- 2 Insert a CD-ROM into the CD loading slot.
- 3 Use VOLUME to adjust the sound level.
- 4 Press A or T to select a folder.
- 5 To perform fast forward or reverse, press and hold < or
- 6 To skip back or forward to another track, press ◄ or ►.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Repeat.
- 3 Press -4 or P- to select the repeat range.
- Notes
- 1 Select the repeat range.
- 2 Press OPEN to open the front panel.
- 1 Select the repeat range.
- 2 Press OPEN to open the front panel.
- 3 Press FUNCTION to select Scan.
- 4 Press ▲ to turn scan play on.
- 5 When you find the desired track (or folder) press T to turn scan play off.
- Note
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Pause.
- 3 Press ▲ to turn pause on.
- 4 Press T to turn pause off.
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY.
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY and hold until the text information begins to scroll to the left.
- © Disc number indicator
- ® Play time indicator
- @ Track number indicator
- 1 Press SOURCE to select the multi-CD player.
- 2 Use VOLUME to adjust the sound level.
- 3 Select a disc you want to listen to with the 1-6 buttons.
- 4 To perform fast forward or reverse, press and hold ◄ or ►.
- 5 To skip back or forward to another track, press ◄ or ►.
- © Function display
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to display the function names.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Repeat.
- 3 Press ◄ or ► to select the repeat range.
- Notes
- 1 Select the repeat range.
- 2 Press OPEN to open the front panel.
- 1 Select the repeat range.
- 2 Press OPEN to open the front panel.
- 3 Press FUNCTION to select Scan.
- 4 Press ▲ to turn scan play on.
- 5 When you find the desired track (or disc) press T to turn scan play off.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Pause.
- 3 Press ▲ to turn pause on.
- 4 Press T to turn pause off.
- 1 Play a CD that you want to program.
- 2 Press OPEN to open the front panel.
- 8 Press BAND to return to the playback display.
- Notes
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY.
- 1 Press OPEN to open the front panel.
- 3 Press -4 or ► to scroll through the list of titles that have been entered.
- 4 Press A to play your favorite CD title.
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY.
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY and hold until the title begins to scroll to the left.
- 3 Press A or T to select your favorite setting.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Comp.
- (D Audio display
- (D Preset equalizer indicator
- d) ASL indicator
- 1 Press OPEN to open the front panel.
- 2 Press AUDIO to display the audio function names.
- Note
- 1 Press EQ and hold until SFEQ appears in the display.
- 2 Press EQ to select the desired SFEQ setting.
- 3 Press -4 or to select the desired position.
- 1 Press OPEN to open the front panel.
- 2 Press AUDIO to select Fad.
- 3 Press A or T to adjust front/rear speaker balance.
- 4 Press -4 or P- to adjust left/right speaker balance.
- (M)
- 2N—IN—1W—2W
- Note
- 1 Press OPEN to open the front panel.
- 2 Press AUDIO to select Bass.
- 3 Press ◄ or ► to select the desired frequency.
- 40—63—100—160 (Hz)
- 4 Press A or T to adjust the bass level.
- 1 Press OPEN to open the front panel.
- 2 Press AU DIO to select Treble.
- 3 Press ◄ or ► to select the desired frequency.
- 2.5k—4k—6.3k—10k (Hz)
- 4 Press A or T to adjust the treble level.
- 1 Press OPEN to open the front panel.
- 2 Press AUDIO to select Loud.
- 3 Press A to turn loudness on.
- 4 Press -4 or P- to select a desired level.
- 5 Press T to turn loudness off.
- 1 Press OPEN to open the front panel.
- 4 Press A or T to adjust the output level of the subwoofer.
- 2 Press AUDIO to select Sub-WI.
- 4 Press -4 or P- to select the phase of subwoofer output.
- 1 Press OPEN to open the front panel.
- 2 Press AUDIO to select non fading output on/off setting.
- 1 Press OPEN to open the front panei.
- 2 Press AUDIO to select Sub-W2.
- 3 Press ◄ or ► to select cut-off frequency.
- 1 Press OPEN to open the front panel.
- 2 Press AUDIO to select non fading output setting.
- 3 Press A or T to adjust the output level of the non fading.
- 1 Press OPEN to open the front panel.
- 2 Press AUDIO to select HPF.
- 3 Press A to turn high pass filter on.
- 4 Press ◄ or ► to select cut-off frequency.
- 50—80—125 (Hz)
- Note
- 1 Compare the FM tuner volume level with the level of the source you wish to adjust.
- 2 Press OPEN to open the front panel.
- 3 Press AUDIO to select SLA.
- 4 Press A or T to adjust the source volume.
- Notes
- (M)
- 1 Press OPEN to open the front panel.
- 2 Press AU DIO to select ASL.
- 3 Press A to turn ASL on.
- 4 Press -4 or ► to select the desired ASL level.
- © Function display
- 1 Press SOURCE and hold until the unit turns off.
- 2 Press OPEN to open the front panel.
- 3 Press FUNCTION and hold until the clock appears in the display.
- 4 Press FUNCTION to select one of the initial settings.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select clock.
- 3 Press ◄ or ► to select the segment of the clock display you wish to set.
- 4 Press A or T to set the clock.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Warning.
- 3 Press A or ▼ to turn Warning on or off.
- 1 Press OPEN to open the front panel.
- 3 Press A or T to turn Flap Auto on or off.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select AUX.
- 3 Press A or T to turn AUX on or off.
- AUX:ON) a
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Dimmer.
- 3 Press A or T to turn Dimmer on or off.
- 1 Press OPEN to open the front panel.
- 3 Press ◄ or ► to adjust the brightness ievel.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Rear SP.
- 3 Press A or T to switch the rear output setting.
- 4 Press ◄ or ► to switch the subwoofer output or non fading output.
- Notes
- 1 Press OPEN to open the front panel.
- 3 Press -4 or ► to switch the telephone muting/attenuation.
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select Motion.
- 3 Press A or T to turn Motion on or off.
- • Press CLOCK to turn the clock display on or off.
- Notes
- • Press SOURCE to select AUX as the source.
- 1 Press OPEN to open the front panel.
- 2 Press ENTERTAINMENT.
- 1 Press OPEN to open the front panel.
- 3 Press 1 numbered button to select the desired character type.
- 4 Press A or T to select a letter of the alphabet.
- 5 Press ► to move the cursor to the next character position.
- 6 Move the cursor to the last position by pressing ► after entering the title.
- 7 Press BAND to return to the playback display. 0
- ® EXTR indicator
- @ TEXT indicator
- @ A (NNC) indicator
- (4) W (THR) indicator
- (D News indicator
- i) Traffic indicator
- 1 Press OPEN to open the front panel.
- 2 Press DISPLAY.
- Note
- Notes
- 1 Press OPEN to open the front panel.
- 2 Press FUNCTION to select program type selection (PTY).
- 3 Press -4 or P- to select a program type.
- 4 Press A to begin the search.
- Notes
- 1 Press PAUSE and hold to display dynamic label.
- 2 Press ◄ or ► to recall the three most recent dynamic label.
- 3 Press ▼ to scroll the dynamic label.
- 1 Display the dynamic label you want to store in memory.
- 2 Press any of 1-6 and hold to store the selected dynamic label.
- d) XM channel number indicator
- ® XM band indicator
- • Press CLOCK and hold to select the desired channel select setting.
- (M)
- DEH-P8500MP