Pioneer SUPER TUNERIII DEH-P8500MP - Manual (Page 23)

MP3/WMA Player
3 c
Section
is particularly the case when playing back
multi-session and many folders. When being
read in, Format Read is displayed.
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
When playing back files recorded as VBR
(variable bit rate) files, the playtime will not be
correctly displayed if fast forward or reverse
operations are used.
If inserted disc contains no files that can be
played back.
No Audio is displayed.
There is no sound on fast forward or reverse.
If the built-in CD player does not operate prop­
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page 49.
When an MP3/WMA disc is inserted, folder
name and file name begin to scroll to the left
automatically.®
Introduction of advanced
built-in CD player (MP3/
WMA) operation
Repeat :DISCr T,
PWFl D r
m
3
(Q
V)
®
© Function display
Shows the function status.
1 Press OPEN to open the front panel.
2 Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be­
tween the following functions:
Repeat (repeat play)— Random (random play)
—Scan (scan play)— Pause (pause)
■ To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display. ®
Repeating play
For MP3/WMA playback, there are three re­
peat play ranges:
FOLDER (folder repeat), TRK
(one-track repeat) and DISC (repeat all tracks).
1 Press OPEN to open the front panel.
2 Press FUNCTION to select Repeat.
Press FUNCTION until Repeat appears in the
display.
En (23)