Pioneer SUPER TUNERIII DEH-P8500MP - Manual (Page 28)

Section ____________________________________________
am ( Multi-CD Player
J c
Scanning CDs and tracks
While you are using DISC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using MCD, the be­
ginning of the first track of each disc is played
for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press OPEN to open the front panel.
3 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.
4 Press ▲ to turn scan play on.
Scan :ON appears in the display. The first 10
seconds of eaoh track of the current disc (or
the first track of each disc) is played.
5 When you find the desired track (or
disc) press T to turn scan play off.
Scan :OFF
appears in the display. The track (or
disc) will continue to play.
■ If the display has automatically returned to
the playback display, select Scan again by press­
ing FUNCTION.
Note
Aftertrackordisc scanning is finished, normal
playback of the tracks will begin again.®
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
3 Press ▲ to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
4 Press T to turn pause off.
Pause :OFF appears in the display. Play will re­
sume at the same point that you turned pause
on.®
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite traoks to the playlist you
oanturn on ITS play and play just those selec­
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Play a CD that you want to program.
Press A or T to select a CD.
2 Press OPEN to open the front panel.
3 Press FUNCTION and hold until TITLE
appears in the display, then press
FUNCTION to select ITS.
After TITLE is displayed, press FUNCTION re­
peatedly, the following functions appear in the
display:
En