Track number indicator, Play time indicator, 1 press eject – Pioneer SUPER TUNERIII DEH-P8500MP User Manual
Page 18: 2 insert a cd into the cd loading slot, 3 use volume to adjust the sound level, A.1 ( built-in cd player, Playing a cd
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Section ________________________________________________
a.1 ( Built-in CD Player
3
c
Playing a CD
These are the basic steps necessary to play a
CD with your built-in CD player. More ad
vanced CD operation is explained starting on
the next page.
® Track number indicator
Shows the track currently playing.
®
Play time indicator
Shows the elapsed playing time of the cur
rent track.
1 Press EJECT.
CD loading slot appears.
■ After a CD has been inserted, press
SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
EJECT
button
■ You can eject a CD by pressing
EJECT.
■ If the front panel is in the eject position
(shown above), buttons other than
EJECT,
VOLUME, OPEN,
and
ATT
(on the remote con
trol) do not operate.
3 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
4 To perform fast forward or reverse,
press and hold ◄ or ►.
5 To skip back or forward to another
track, press ◄ or ►.
Pressing ► skips to the start of the next track.
Pressing ◄ once skips to the start of the cur
rent track. Pressing again will skip to the pre
vious track.
Notes
The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
Do not insert anything other than a CD into
the CD loading slot.
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting the disc
again.
▲ and
T
can be operated when MP3 or WMA
is playing.
If the built-in CD player does not operate prop
erly, an error message such as
ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page 49.
You can eject the CD by pressing and holding
EJECT
with eject position when the CD load
ing or ejecting cannot operate properly.
When a CD TEXT disc is inserted, the disc and
track titles begin to scroll to the left auto
matically,®
CD
En