Section vil.care of your machine, Replacing the light bulb, Cleaning the feed dogs – Kenmore 385.15208 User Manual

Page 66

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION VIl.CARE OF YOUR MACHINE

NOTE:
* Unplug the machine.
* Do not dismantle the machine other than as explained

in this section.

* Do not store the machine in a high-humidity area, near

a heat radiator or in direct sunlight,

* Clean the outside of the machine with a soft cloth and

mild soap.

Replacing the Light Bulb

CAUTION:

As the light bulb could be HOT, protect your fingers when
you handle it.

Unplug the machine and open the face cover. While
pushing the bulb up, turn it to the left (counterclockwise) to
remove. Put in a new bulb by pushing it up and turning it to

the right (clockwise).

Cleaning the Feed Dogs
Unplug the machine, and remove the presser foot and
needle. Open the face cover to allow room to remove the
needle plate screw with a screwdriver,

Use a lint brush to clean the feed dogs.

NOTE:
Lint brush is not furnished with model 15202, but may be
ordered, (page 4)

Replace the needle plate and tighten it with a screwdriver.