Twin needle stitches (option), Twin needle stitches – Kenmore 385.15208 User Manual

Page 60

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Twin Needle Stitches (Option)

(D stitch

selector:

*3,8 or 9

@ Presser foot:
(D Needle thread tension:
(4) Stitch length:
(D Stitch width;

Needle:

Zigzag foot

1 to 4

0.5 to 1

1 to 2.5

Twin needle (optional item)

‘Stitches 8 and 9 are only available for model 15208.

NOTE: Do not set the stitch width at more than 2.5,
otherwise the needle may hit the needle plate or presser
foot and could possibly break.

(T) Upper thread guide
(DCheck spring holder
CDThread take-up lever
@Needle bar thread guide
(5)Twln needle (optional item)

Turn off the power switch. Pul! up the additional spool pin.

Place a piece of felt on the additional spool pin. Make sure

you separate the two threads by placing one thread in each
needle bar thread guide©.
Change the needle to a twin needle Thread each needle
from front to back.

When you want to shift the fabric to change the sewing
direction, you must first raise the needie out of the fabric.